Document Type : Original Article
Authors
1
Department of Chemistry, Faculty of Sciences and Arts, Khulais, University of Jeddah, Saudi Arabia. Department of Water Pollution Research, National Research Centre, El Bohouth St, Dokki, Giza, Egypt 12622.
2
Water Pollution Research Department, National Research Centre, Dokki, Giza, Egypt.
3
Department of Chemistry, College of Sciences and Arts at Khulais, University of Jeddah, Saudi Arabia Department of Refractories, Ceramics and Building Materials, National Research Centre, 33 El Bohouth St, Dokki, Giza, Egypt 12622
4
Department of Chemistry, College of Sciences and Arts at Khulais, University of Jeddah, Saudi Arabia
Abstract
In the current study, alumina nanoparticles were prepared from waste aluminum residue by an extraction and gel formation method. The prepared alumina nanoparticles were used to remove reactive yellow 160 (RY160) from an aqueous solution. The kinetics and adsorption equilibrium were discussed as well.
The results show that, the heat-treated samples were consistings only of Al and O elements only and their crystalline phase was pure alumina in the nano scale. The alumina nanoparticles were effective adsorbents for the removal of RY160 from aqueous solution with percentage removal 100 % for samples heat-treated at 110°C and 600°C. The adsorption data was well fitted to Langmuir isotherm model for all prepared samples indicating a monolayer adsorption. The adsorption process was found to be endothermic and the adsorption takes place physically on the surface of alumina nanoparticles. The prepared alumina nanoparticles samples can be used as an efficient adsorbent in water treatment.
Keywords
Main Subjects
)
View on SCiNiTO