Experimental Study for Improving Oil Recovery Using Organic Alkaline and Nano-Silica for An Egyptian Oil Field

Document Type : Original Article

Authors

Department of Petroleum and Gas Technology (Faculty of Energy and Environmental Engineering,The British University in Egypt (BUE) , El-Shorouk City, Cairo 11837, Egypt.

Abstract

Nowadays, the oil and gas industry is considering the trends towards the implementation of nanotechnology in many enhanced techniques of hydrocarbon recovery. This trend is greatly influenced by the distinct and unique specifications and properties of nanoparticles. Nanoparticles can provide an additional ability to oversee the conditions of the hydrocarbon reservoirs, with the aim of increasing productivity and reaching satisfactory recovery percentages. Nanoparticles are considered effective to this extent due to their potential to provide an appropriate environment in order to decrease the interfacial tension and change the wettability of reservoir rocks, in addition to their capability to improve the oil mobility and their ability to advance the uniformity of the sand. This study discusses modeling and optimization of different flooding situations using organic alkaline, ethylenediamine, and nanoparticles, SiO2, at harsh reservoir conditions of high salinity. Organic alkaline solves two main problems facing inorganic alkaline like the precipitation of calcium and magnesium ions and reduction of polymer viscosity. The physical properties of the displacing fluids and crude oil are measured. The flooding runs were tested on linear sand pack unit using various slugs’ concentrations. Wettability alterations were also observed by various slugs’ concentrations. Design Expert software was used to generate the concentrations used in this study and determine the optimum concentrations. The results showed that the highest oil recovery was achieved by 0.7 wt. % ethylenediamine, and 0.02475wt% Nano silica.

Keywords

Main Subjects



Articles in Press, Accepted Manuscript
Available Online from 02 August 2024
  • Receive Date: 13 June 2024
  • Revise Date: 28 July 2024
  • Accept Date: 02 August 2024