Hydroxyapatite/ Chitosan Coating By Electrophoretic Deposition on SS 316L For Biomedical Application

Document Type : Original Article

Authors

1 Msc. Student, material engineering department, University of Technology, Iraq- Baghdad

2 Material Engineering Department, University of Technology, Baghdad

3 Material Engineering Department, University of Technology, Baghdad,

Abstract

Abstract.316L stainless steel was coated with Hydroxyapatite-chitosan (HAP-CS) using a pulsed electrophoretic deposition (PEPD) technique at a constant voltage (30 V) and frequency (50 Hz).The deposited coatings were analyzed using X-ray diffraction spectroscopy (XRD) ,micro roughness test, and scanning electron microscope (SEM), as well as, the Zeta potential for suspensions were calculated. In this paper was studied the characterization of the chitosan – hydroxyapatite coating on the 316L Stainless Steel.

Keywords

Main Subjects


Volume 65, Issue 13 - Serial Number 13
Special Issue: Chemistry and Global Challenges
December 2022
  • Receive Date: 11 March 2022
  • Revise Date: 30 April 2022
  • Accept Date: 17 May 2022
  • First Publish Date: 17 May 2022