Mixed Polymeric Wastes as a Promise Path to Green Roads

El-Shafie, Mohamed; Abo-Shanab, Zeinab; Mohammedy, Mohamed; Shaker, Nevine Omar; Kandil, Usama Farid Mahmoud

doi:10.21608/ejchem.2021.72756.3611

Mixed Polymeric Wastes as a Promise Path to Green Roads

Document Type : Original Article

Authors

¹ Petroleum applications department, Egyptian Petroleum Research Institute (EPRI), Cairo, Egypt.

² Petroleum apllications department, Egyptian petroleum Research Institute, Nasr city, EGYPT.

³ bPetroleum Application Department,Egyptian Petroleum Research Institute,Cairo11727,Egypt

⁴ Petroleum Applications Department, Egyptian Petroleum Research Institute, Nasr City, Cairo, Egypt

10.21608/ejchem.2021.72756.3611

Abstract

Abstract
In this study, asphalt binder was loaded with 5%, 10%, 15% and 20%wt of grinded mixed waste of plastics. The plastic waste comprised mainly from a mixture of PE/EPDM (60/40 wt.%), . To study the effect of these wastes on asphalt binder performance; the physical properties of asphalt binder were studied including penetration, viscosity, and softening point. The mechanical characteristics of modified asphalt binder were studied using dynamic mechanical analyzer (DMA). Two types of sweep tests were conducted on virgin and modified asphalt binder to study the effects of temperature and frequency on binder performance. Elastic recovery of modified asphalt binder was also investigated using the stress relaxation mode in DMA. In addition, the fatigue properties of modified asphalt samples were estimated from the obtained data of loss modulus and rutting factor (G*sinδ). It is observed that mixed plastic waste positively enhances the performance of asphalt binder.

Keywords